CONCRETE CURING COMPOUND

Concrete Curing

SCOPE OF WORK

Application of curing compound onto fresh concrete surface

GENERAL PURPOSE OF CURING COMPOUNDS FOR FRESH CONCRETE

• To form a film covering the surface of concrete to prevent premature water loss due to evaporation
• Allow the concrete to cure with complete hydration of cement and achieve maximum properties.

MATERIALS AVAILABLE FOR CONCRETE CURING

ANTISOL E
  • Emulsified paraffin based curing compound.
  • Ready to use
  • Very effective particularly on horizontal surfaces even subject to windy and sunny conditions
  • Shall be removed prior application of subsequent surface treatment
ANTISOL S
  • Aqueous concrete curing silicate solution
  • Ready to use
  • Particularly used for the treatment of vertical concrete surface
  • Does not impair adhesion of subsequent treatments to concrete surface (when applied within recommended dosage rates)

COMPOUND  APPLICATION PROCEDURE

Please consult our product technical data sheets for full application recommendations.
  • Applicable by spray.
  • Typical Consumption rate: 0.2 to 0.25 litre of Antisol E or Antisol S per m2.
  • Protect fresh coat from rain
Previous Post
No Comment
Add Comment
comment url